Baby toddler bike helmet test 2020 ▷ comparison of recommendations

infant & Toddler bike helmets test & 2020 comparison

Babies usually only learn to ride a bike at the age of two or are on the go with their own scooter. At the latest now you need your own helmet to get more protection in the event of falls and accidents. But even on the first bike tour in the child’s seat with the parents, a baby bike helmet is part of the important safety equipment. Prerequisite: the little ones can sit independently. A baby may only be transported in a child seat if the build, maturity and neck muscles allow it. After all, your child is exposed to great stress on the bike. A bicycle trailer is therefore more suitable for the first time. A helmet is also required for protection here. It must not put too much strain on the head, it must be extremely comfortable to wear and, of course, it must meet all safety requirements. In the following sections we take a closer look at the structure and the most important criteria for the baby bike helmet.

The best shape – flat helmets with a solid shell

Micro shell helmets or soft shell helmets are best suited for small children, although the first category offers significantly more safety. Most of the time, the model has a hard shell made of plastic with many openings and a core made of hard foam inside. Additional pads are attached to the rigid foam with Velcro, are washable and provide care for one pleasant wearing comfort. Important for a baby helmet: it must have the lowest possible weight. After all, the neck muscles are usually not yet sufficiently developed. Your child has to do with holding the heavy head alone and the helmet must not complain. At best, your baby shouldn’t notice the model if it weighs between 200 and 300 grams. When buying, make sure there are enough ventilation holes in the helmet and a safety net. This way, no insects get caught in the holes during the ride and your baby stays comfortably cool in warmer temperatures.

A useful feature in baby helmets: the back of the head is significantly flattened and less rounded. This makes it easier to ride in a bicycle trailer or child seat, because the little ones are not pushed forward by the helmet. Your infant can sit upright in spite of a bicycle helmet or can be brought halfway into the lying position in the trailer. In addition, the helmets enclose almost the entire back of the head and go very far to the forehead or to the temples. This guarantees complete all-round protection.

The adjustment mechanism – adapt the helmet to the shape of the head

The helmets are closed with a chin strap and offer an adjustment mechanism for the respective head shape. You loosely place the model on your baby and usually turn it with the help of a small wheel. The inner construction in the bicycle helmet is made of plastic and ensures that the shell fits securely and firmly on the head without pressing. Of course there are different principles here and not every helmet will fit the shape of the head. However, this system also allows you to wear a hat under your helmet. After all, your child still needs to be protected from the cold or sunlight and wind. A hat is therefore always recommended and often offers even better comfort on the sensitive head area.

Finally, you close the chin strap, which can also be adjusted in length. It should also have a small pad under the chin to increase comfort and avoid pressure points. Since it is a plug-in fastener, it cannot be accidentally opened by your child while driving.

Calculate the right size – babies start at XS

The question of helmet size usually does not arise in babies. After all, they are the smallest heads, who often also need the smallest bicycle helmet. Most manufacturers refer to these helmets as size XS. It’s best to measure your child’s head circumference again with a tape measure from the neck to the middle of the forehead. The head circumference then determines the size of the helmet, according to this table:

Helmet size baby head circumference Age
XS 44 cm – 49 cm 0 – 3 years
S 46 cm – 51 cm 2 – 7 years

If the head circumference is exactly 48 or 49 cm, you should already choose size S. After all, the helmet must fit properly for optimal protection, but also not be too loose. He must have no play to the side and must not be easily pushed back or pulled forward. A larger model has the advantage that it grows longer. Basically, the shape of the head determines the size of the helmet.

The right size is crucial for every child’s helmet, as the little ones are still growing. Optimal protection is only required if the helmet is firmly and properly attached to the child’s head. It must not be easy to pull forward or push it back. A game to the side is also not recommended. Some helmets grow with their interior settings. This means that they can be used significantly longer and adapted to different head shapes.

It is best to let your child try on the helmet and wear it for 15 minutes. If there are no complaints and the helmet is literally forgotten, it fits well. The only problem: small children usually have to get used to the feeling and want to get rid of the foreign body quickly. Some children are sensitive even with tight hats and need their time to get used to the helmet.

Many colorful designs – your baby should decide

Of course, baby bike helmets don’t just differ in size. There are many different designs to choose from – from solid colors, mixed colors, to comic motifs or zoo animals. Just try out if your baby might want to make the choice himself. After all, it is the best way to identify with the helmet and may have a lot more fun putting it on. If the helmet looks good, half the convincing work is already done.

The advantages and disadvantages of the bicycle helmet for babies

    optimal protection for child seat and bike trailer less risk of injury child-friendly designs high wearing comfort
    Try-on required size differences among manufacturers

Functions and safety of the baby bike helmet – regulations and test seals

Many parents ask themselves when their baby will be allowed to ride in the child seat for the first time on a bike. There is no general age here. From about half a year, the children start to sit themselves and strengthen their neck muscles. Under no circumstances should they be taken on a bicycle. Decide yourself, depending on the stage of development, when the right time has come. The older and the stronger the muscles in the neck, the better. After all, many forces act on the small body when cycling, which not every seat or bicycle trailer can absorb. Most of the time, the trailers are better for the beginning because the children can be easily transported in an almost lying position. There is no helmet requirement in the trailer or on the child seat.

Ventilation holes as a security feature – about 7 openings

You can recognize the good quality of a baby helmet by the ventilation slots. There should be about 7 to 9 openings in the top of the helmet. Sufficient fresh air reaches the scalp in summer and your baby does not start to sweat under the hat and helmet even in winter. Here you can directly check whether the inner hard foam is firmly connected to the outer plastic shell or only glued in some places. If you can easily detach the shell from the hard foam at the openings, you should better choose a different helmet. In addition, as already mentioned, the openings in the front area must always be underlaid with a safety net. This way, no foreign objects get into the holes while driving.

TÜV and CE seal – pay attention to standards

Of course, not only design and comfort play an important role when buying. In terms of the security features, the model should have passed some tests and be able to show test seals. The TÜV mark, CE or GS seal are important standards that no helmet should be without. Also pay attention to the standard notice "EN 1078". This symbol confirms that the helmet has passed a real drop test with a dummy. Only those who have carried out this real test as a manufacturer are allowed to show the standard. Of course you can also look at the results of Stiftung Warentest or read the test report of the ADAC.

Visibility in the dark – light and reflectors

Reflectors and light on the baby helmet only play an important role in toddler age. Some helmets can be used as long as possible until your child is on the road with the wheel or scooter. If you are looking for a long service life, there should be light or reflectors on the helmet. Some baby helmets have integrated a red light on the adjustment system at the back of the head and show light strips on the shell of the helmet. Important with this safety equipment: it must not weigh down the helmet. The baby helmet must remain as light as possible. You can easily retrofit reflectors with stickers for more visibility in traffic.

Tips for a perfect fit – this is how the helmet fits properly

    The helmet must fit the padded areas on the head. The straps must pass the ears and fit the cheeks. The closure should always click and not be easy to open. Tighten the straps as tight as possible so that the pad lies against the chin. The back of the head must be completely covered. The front edge should stop eyebrows. The helmet must sit straight and must not wobble. Your forehead wrinkles best if you move the helmet slightly.

Purchase criteria for baby & Toddler bike helmets – light and stable

We have already shown you important features about the helmets and some Tips given for comfort. However, this does not reduce the selection of different models and manufacturers. Below we want to list the most important purchase criteria for a baby helmet again.

benefits disadvantage
    firm but not too tight Helmet must not slip, pay attention to comfort. Cushions on the chin and head. Adjustment system for each head shape. Straps should form a triangle on the ear
criteria Hints
    Helmet needs low weight. Materials such as plastic and hard foam only 200 – 300 grams if possible. Babies still have weak neck muscles
    Sizes from XS to S for babies always measure the head circumference and compare boys usually taller than girls, always take the larger model if you are unsure
    TÜV, GS and CE seals are best tested according to DIN EN 1078 reflectors on the helmet 7-9 ventilation slots with protective net light is not always available
    Closure should click into place or click Children should not open the helmet themselves must not loosen too easily Chin strap is always adjustable Chin pad under the clasp

The main manufacturers – Uvex, Ked and Co.

Various manufacturers are behind the large selection of models and designs. Everyone brings their own peculiarities and advantages. We show you the most important brands in this overview:

    Sizes from XS outer shell made of PVC comfort closure for easy click-in, stepless adjustment inside light weight under 200 grams striking and colorful designs deep area at the back of the head
    Quality since 1924 models in S and M from 45 cm head circumference many colorful designs flat falling back secure closure on the chin with upholstery close to 200 grams dead weight
    Small sizes from XS (44 cm) flat back many colors and designs over 7 air openings with individual mesh > Snap lock with chin pad

Of course there are other manufacturers on the market with similar models. In addition to protection, fit and weight, the many colorful designs naturally play a role in the selection. Perhaps there is a suitable product from these manufacturers:

Manufacturer particularities


Like this post? Please share to your friends:
Christina Cherry
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: