Child bike seat test: find the right child bike seat

There is hardly anything more timeless when it comes to being on the bike with the child or children than a child bike seat. The principle of a child bike seat has always remained the same across the board years However, the technology, the material and the processing have improved. In addition to functionality, safety comes first. Despite the growing popularity of children’s bike trailers, children’s bike seats are not losing their appeal.

Attachment of the child bike seat to the bike

The attachment of the child seat is the most important issue next to the processing. The material is exposed to higher loads during the journey. Since you don’t always want to be on the bike with the child seat, most models are designed so that they can be removed easily and with just a few simple steps. For this purpose, the bracket is firmly connected to the bike, it is screwed to the frame and offers the option of hanging the child seat using the plug-in system.

Here, at least two metal rods are inserted into the holder. This technology ensures that the child bike seat cannot rotate. Depending on the model, the child seat also sits on the luggage rack. In this way, the resulting forces are ideally absorbed and distributed. The mounting bracket should also be lockable, so the child seat is protected against unwanted theft. Depending on the bike insurance, add-on parts such as a child bike seat are also insured.

In addition to the children’s bike seat for the rear, there are also children’s bike seats for the front. These are attached to the handlebars, and the child rotates along with the child seat during a steering movement. Unlike the rear models, the child is always in view. The positive influences from the improved center of gravity are subject to excessive exposure to wind and weather influences such as rain and snow.

Material from the child bike seat

Plastic is the material of choice, high flexibility and low weight, there are also qualitative differences. The material behavior under the influence of temperature is crucial. In summer as well as in winter, the plastic parts must not become brittle or brittle when exposed to sunlight or when exposed to the cold. The plastics used should always comply with the European standard. Plasticizers and other pollutants are an absolute no-go. This is ensured by a seal from the TÜV or GS. Well-known manufacturers of children’s bicycle seats are: Römer, Bellelli, Hamax, Kettler, Polisport and others.

Results of the bicycle seat test – rear assembly

Manufacturer / seat price Test (

1-5.5)

providers Britax Römer bicycle seat jockey. € 139.95 A good 2.2 Amazon Britax Römer bicycle seat JOCKEY. N / A A good 2.3 Amazon Prophete child safety seat. € 37.95
€ 44.99 Adequate 2.6 Amazon Polisport children. € 69.96
€ 99.00 – Amazon Walser 15409 child bike seat. N / A – Amazon HAMAX children’s bike seat Sleepy. € 79.53
€ 94.70 – Amazon

Upholstery of the seat

So that the children do not have to experience every shock without padding, the padding should be sufficiently thick and stable. provides If you find out over time that the seat cushion is not sufficient, you can help out with a pillow.

Bicycle seat safety

The child should be buckled up at all times and even on shorter distances. The safety principle of the bicycle seat only works properly with a seat belt. In addition, the child should wear a bicycle helmet.

The feet and legs of the children must be separated from the spokes by the design of the child bike seat. The seat belt and footrests should be adjustable in size. With this function you have a growing child seat for the bike and you don’t have to buy a new child bike seat when the child grows. On the picture you can see the adjustment technology of the footrests. This adjusts the support for the feet to the respective leg length. If you don’t want to lose sight of the little ones while driving, we recommend installing a rear-view mirror on the handlebars.

If you put the bike on a normal bike stand, it tilts because of the increased weight. Depending on the model, a bipod bike stand provides the necessary safety when parking. At the same time, however, you should teach the child to sit still in the bicycle seat.

Requirements for children in a bicycle seat

From a weight of 15 kg, the children must always be carried in the rear child seat. In Germany, children up to 15 kg body weight may also be carried in the front. The following applies: Children aged 9 months and 5 years or weighing 9 kg to 22 kg may be carried in a child’s bicycle seat.

What to look for before buying:

  • Tube diameter from the bike must match the child bike seat
  • Inch size of the bike must also match the manufacturer’s specifications for the seat
  • Other mounting dimensions for the seat post or the luggage rack should be correct
  • Suitability for children at the right age, you should pay close attention to the age of the manufacturer. This is the only way to ensure that the seat belts fit properly.

Conclusion: bike seat test

A child bike seat is ideal for anyone who wants to go on a bike tour with their children and do not want to let the little ones ride themselves. Ideal for trips on good days and in not too cold temperatures. If the minus degrees are too low, you should pay attention to the wind. Whether for shopping, kindergarten or visiting grandma, a bicycle seat is suitable.

However, if you are looking for a covered and weather-protected option, you should keep an eye out for a children’s bike trailer.

RELATED ITEMS

Like this post? Please share to your friends:
Christina Cherry
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: